Skotek 1050W Electric Hammer Drill Troubleshooting

How to use my Skotek 1050W Electric Hammer Drill

1. Mount the auxillary handle to the flange behind the chuck
   
   
2. Tighten the handle to your desired position
   
   
3. Loosen the chuck by hand until the jaws open enough to allow the drill bit in
   
   
4. Insert the drill bit, now tighten the chuck using the chuck key
   
   
5. Ensure the drill bit stays in the central of the chuck jaws. 
   
   
6. Now plug the 3 pin plug into a standard power point
   
   
7. Now pull the trigger and keep holding it for continuous operation
   
   
8. You can vary the speed depending on how much pressure is applied to the trigger
   
   
9. You can use the forward and reverse button above the trigger to switch between clockwise or anticlockwise rotation. 

Skotek 1050W Electric Hammer Drill FAQ's

Does the product come with a UK 3 pin plug?
Yes the product is fitted with a standard 3 pin plug.

What is the max drill bit size for masonary/brick?
The max drill bit size is 13MM.

How much does the drill weigh?
The drill weighs 2KG.

Is a chuck key provided?
Yes a chuck key is provided with the drill.

What size is the chuck?
The chuck is 1.5MM to 13MM.

How long is the power cable?
The power cable is 1.5M in length.

Is this a SDS drill or SDS plus drill?
No, this drill is not a SDS drill, this drill uses standard drill bits.

What is the warranty on this drill?
The drill is supplied with a two year warranty.

Does the drill come with a carry case?
No the drill does not come with a carry case.

Skotek1050W Electric Hammer Drill Troubleshooting

My drill is sparking?
This is a normal part of the drill operation as the drill is using brushed motors to convert electric energy into the motion that drives the spinning drill bit.

The chuck is defective, locked, jammed?
Please contact our customer care team for assistance. 

My drill wont operate when im pulling the trigger?
Please contact a member of our customer care team for assistance.

My drill is missing parts?
Please contact our customer care team for assistance. 

Still require help?
Contact our customer care team at Help@futuradirect.co.uk or give us a call on (+44) 01302 540326 Mon - Fri 09:00AM - 16:00PM